Industrial Floor Treatments (Stone) Ltd
| |
Industrial Floor Treatments (Stone) Ltd |
|
|---|---|---|
Unit 7, Emerald Way, Stone
Business Park, Stone, Staffordshire, ST15 0SR
|
IFT (Stone) Ltd install epoxy resin based floor coatings and screeds throughout England across all sectors of industry such as electronics, automotive, aerospace, engineering, chemical, pharmaceutical, food and drinks, printing, paper and packaging.
We offer solutions to many flooring problems with installed systems designed to meet the demanding constraints of industry, offering a personal service tailored around company requirements including weekends and Bank Holiday working.
Be it a new floor or refurbishment project, IFT (Stone) Ltd offer a total package encompassing site survey, specification, surface preparation and product installation.We operate in full compliance with the Health & Safety at Work Acts and will provide:
Floor PaintsEconomical single pack acrylic and
polyurethane floor coatings for the sealing and dustproofing of
concrete floors in the Industrial Environment.
0.1mm approximate thickness for two coats.
Epoxy and Polyurethane Resin Floor & Wall
CoatingsHard wearing, abrasion resistant two-pack
coatings, providing both mechanical and chemical protection.
Anti-slip systems are available.
0.2mm to 1.0 mm thickness for two coats.
Epoxy and
Polyurethane Floor ScreedsHard wearing, high
strength, chemically resistant floor topping and screeds. Suitable
for heavy engineering plants, chemical plants, electro-plating
shops, etc.
2mm to 9mm in thickness.
Food Grade
Floor Coatings and ScreedsA range of products
containing the anti-microbial agent Ultra-Fresh©, an
antimicrobial additive that inhibits the growth of a wide spectrum of
bacteria, fungi, moulds and mildew.
Anti Static Coatings and ScreedsA range of conductive floor finishes designed to eliminate the problems of ESD (Electro Static Discharge) in the workplace. Should always be considered as part of an overall ESD programme e.g. anti- static clothing and footwear, heel grounders, wrist straps, etc.
Epoxy and Polyurethane Terrazzo
ScreedsA range of decorative terrazzo screeds for
application in both Industrial and Commercial environments.
Pumpable Flowing
Screeds
With application speeds of up to 1,500 m2 per day and laid at
a typical minimum thickness of 7mm, these screeds have been
applied with great success in both industrial and commercial
environments. Available in a range of products designed to match
the requirements of varying markets, they can be applied on top of
new and old concrete, existing screeds and even (with the fibre
reinforced product) on top of existing well bonded finishes such as
vinyl, timber or old adhesives.
Polymer Screeds
Polymer Screeds are principally utilised in the industrial
environment to provide thin section (minimum 12mm) hard wearing
screeds as an overlayment to old and worn concrete floor slabs.
The inclusion of a synthetic resin polymer resin provides excellent
durability and high strength bonding properties.
Industrial Floor Treatments (Stone) Ltd Registered in England Wales No. 5217471
VAT Reg. No: 846 8821 83